Atomic Layer Deposition of Al₂O₃-Ga₂O₃ Alloy Coatings for Li[Ni_0.5Mn_0.3Co_0.2]O₂ Cathode to Improve Rate Performance in Li-Ion Battery

Metal oxide coatings can improve the electrochemical stability of cathodes and hence, their cycle-life in rechargeable batteries. However, such coatings often impose an additional electrical and ionic transport resistance to cathode surfaces leading to poor charge-discharge capacity at high C-rates. Here, a mixed oxide (Al₂O₃)_1-x(Ga₂O₃)_x alloy coating, prepared via atomic layer deposition (ALD), on Li[Ni_0.5Mn_0.3Co_0.2]O₂ (NMC) cathodes is developed that has increased electron conductivity and demonstrated an improved rate performance in comparison to uncoated NMC. A "co-pulsing" ALD technique was used which allows intimate and controlled ternary mixing of deposited film to obtain nanometer-thick mixed oxide coatings. Co-pulsing allows for independent control over film composition and thickness in contrast to separate sequential pulsing of the metal sources. (Al₂O₃)_1-x(Ga₂O₃)_x alloy coatings were demonstrated to improve the cycle life of the battery. Cycle tests show that increasing Al-content in alloy coatings increases capacity retention; whereas a mixture of compositions near (Al₂O₃)_0.5(Ga₂O₃)_0.5 was found to produce the optimal rate performance.