Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells

Sreejith Karthikeyan; Mandip Sibakoti; Richard Liptak; Sang Ho Song; Joel Abrahamson; Eray S. Aydil; Stephen A. Campbell

doi:10.1109/PVSC.2014.6925232

Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells

Sreejith Karthikeyan, Mandip Sibakoti, Richard Liptak, Sang Ho Song, Joel Abrahamson, Eray S. Aydil, Stephen A. Campbell

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Scopus citations

Abstract

Copper indium gallium diselenide (CIGS) based solar cells have shown efficiencies > 20% on the lab scale and are already in commercial production. Even though the optimal band gap of 1.6 eV to 1.7 eV can be achieved by increasing the Ga content, these solar cells show a maximum efficiency at ∼1.3 eV and any further increase in the Ga concentration and band gap results in lower efficiencies due to bulk and interfacial traps. This also prevents the use of wide band gap CIGS layer as a top cell for harvesting the solar cell spectrum in a tandem cell configuration. This paper reports the manufacturing challenges on the production of wide band gap aluminum doped CIGS layers (CIAGS) and devices fabricated using this material. We have fabricated 11.3% efficient solar cells using the CIAGS absorber layers.

Original language	English (US)
Title of host publication	2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1632-1634
Number of pages	3
ISBN (Electronic)	9781479943982
DOIs	https://doi.org/10.1109/PVSC.2014.6925232
State	Published - Oct 15 2014
Event	40th IEEE Photovoltaic Specialist Conference, PVSC 2014 - Denver, United States Duration: Jun 8 2014 → Jun 13 2014

Publication series

Name	2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014

Other

Other	40th IEEE Photovoltaic Specialist Conference, PVSC 2014
Country/Territory	United States
City	Denver
Period	6/8/14 → 6/13/14

Bibliographical note

Publisher Copyright:
© 2014 IEEE.

Keywords

CIAGS solar cells
tandem solar cells
wide band gap absorber layer

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access

10.1109/PVSC.2014.6925232

OpenUrl availability

Full text

Cite this

Karthikeyan, S., Sibakoti, M., Liptak, R., Song, S. H., Abrahamson, J., Aydil, E. S., & Campbell, S. A. (2014). Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells. In 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014 (pp. 1632-1634). Article 6925232 (2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PVSC.2014.6925232

Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells. / Karthikeyan, Sreejith; Sibakoti, Mandip; Liptak, Richard et al.
2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 1632-1634 6925232 (2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Karthikeyan, S, Sibakoti, M, Liptak, R, Song, SH, Abrahamson, J, Aydil, ES & Campbell, SA 2014, Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells. in 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014., 6925232, 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014, Institute of Electrical and Electronics Engineers Inc., pp. 1632-1634, 40th IEEE Photovoltaic Specialist Conference, PVSC 2014, Denver, United States, 6/8/14. https://doi.org/10.1109/PVSC.2014.6925232

Karthikeyan S, Sibakoti M, Liptak R, Song SH, Abrahamson J, Aydil ES et al. Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells. In 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 1632-1634. 6925232. (2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014). doi: 10.1109/PVSC.2014.6925232

Karthikeyan, Sreejith ; Sibakoti, Mandip ; Liptak, Richard et al. / Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells. 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 1632-1634 (2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014).

@inproceedings{68c93ef8036249ce97d98a35dd8f4e27,

title = "Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells",

abstract = "Copper indium gallium diselenide (CIGS) based solar cells have shown efficiencies > 20% on the lab scale and are already in commercial production. Even though the optimal band gap of 1.6 eV to 1.7 eV can be achieved by increasing the Ga content, these solar cells show a maximum efficiency at ∼1.3 eV and any further increase in the Ga concentration and band gap results in lower efficiencies due to bulk and interfacial traps. This also prevents the use of wide band gap CIGS layer as a top cell for harvesting the solar cell spectrum in a tandem cell configuration. This paper reports the manufacturing challenges on the production of wide band gap aluminum doped CIGS layers (CIAGS) and devices fabricated using this material. We have fabricated 11.3% efficient solar cells using the CIAGS absorber layers.",

keywords = "CIAGS solar cells, tandem solar cells, wide band gap absorber layer",

author = "Sreejith Karthikeyan and Mandip Sibakoti and Richard Liptak and Song, {Sang Ho} and Joel Abrahamson and Aydil, {Eray S.} and Campbell, {Stephen A.}",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 40th IEEE Photovoltaic Specialist Conference, PVSC 2014 ; Conference date: 08-06-2014 Through 13-06-2014",

year = "2014",

month = oct,

day = "15",

doi = "10.1109/PVSC.2014.6925232",

language = "English (US)",

series = "2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1632--1634",

booktitle = "2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014",

}

TY - GEN

T1 - Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells

AU - Karthikeyan, Sreejith

AU - Sibakoti, Mandip

AU - Liptak, Richard

AU - Song, Sang Ho

AU - Abrahamson, Joel

AU - Aydil, Eray S.

AU - Campbell, Stephen A.

PY - 2014/10/15

Y1 - 2014/10/15

N2 - Copper indium gallium diselenide (CIGS) based solar cells have shown efficiencies > 20% on the lab scale and are already in commercial production. Even though the optimal band gap of 1.6 eV to 1.7 eV can be achieved by increasing the Ga content, these solar cells show a maximum efficiency at ∼1.3 eV and any further increase in the Ga concentration and band gap results in lower efficiencies due to bulk and interfacial traps. This also prevents the use of wide band gap CIGS layer as a top cell for harvesting the solar cell spectrum in a tandem cell configuration. This paper reports the manufacturing challenges on the production of wide band gap aluminum doped CIGS layers (CIAGS) and devices fabricated using this material. We have fabricated 11.3% efficient solar cells using the CIAGS absorber layers.

AB - Copper indium gallium diselenide (CIGS) based solar cells have shown efficiencies > 20% on the lab scale and are already in commercial production. Even though the optimal band gap of 1.6 eV to 1.7 eV can be achieved by increasing the Ga content, these solar cells show a maximum efficiency at ∼1.3 eV and any further increase in the Ga concentration and band gap results in lower efficiencies due to bulk and interfacial traps. This also prevents the use of wide band gap CIGS layer as a top cell for harvesting the solar cell spectrum in a tandem cell configuration. This paper reports the manufacturing challenges on the production of wide band gap aluminum doped CIGS layers (CIAGS) and devices fabricated using this material. We have fabricated 11.3% efficient solar cells using the CIAGS absorber layers.

KW - CIAGS solar cells

KW - tandem solar cells

KW - wide band gap absorber layer

UR - http://www.scopus.com/inward/record.url?scp=84912118966&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84912118966&partnerID=8YFLogxK

U2 - 10.1109/PVSC.2014.6925232

DO - 10.1109/PVSC.2014.6925232

M3 - Conference contribution

AN - SCOPUS:84912118966

T3 - 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014

SP - 1632

EP - 1634

BT - 2014 IEEE 40th Photovoltaic Specialist Conference, PVSC 2014

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 40th IEEE Photovoltaic Specialist Conference, PVSC 2014

Y2 - 8 June 2014 through 13 June 2014

ER -

Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells

Abstract

Publication series

Other

Bibliographical note

Keywords

UN SDGs

Access

OpenUrl availability

Other files and links

Fingerprint

Cite this