Abstract
Microalgae is a promising biomass feedstock for the production of valuable bioenergy and bioproducts. Here the comparative differences of microalgae productivity potential in open raceway ponds and flat panel photobioreactors for different geographical locations in the United States are presented. Microalgae productivity potential was determined using a first-principles based model incorporating geographical variabilities and climate factors, including solar irradiance, air temperature, relative humidity, and wind velocity. Microalgae productivity varied from 2000 to 13,000 t km− 2 year− 1 for the different locations and reactor systems. Based on detailed economic analysis, microalgae costs were shown to vary between 500 and 9560 $ t− 1. The costs variation can be mainly attributed to the differences in productivity potential for a geographic location and reactor system as well as to the different process engineering design parameters. The results from this work on provide important information on commercial feasibility of implementing algal biorefineries.
| Original language | English (US) |
|---|---|
| Article number | 100328 |
| Journal | Bioresource Technology Reports |
| Volume | 8 |
| DOIs | |
| State | Published - Dec 2019 |
Bibliographical note
Funding Information:We would like to acknowledge the funding support by the Buckman Graduate Fellowship from the Department of Bioproducts and Biosystems Engineering and the Doctoral Dissertation Fellowship at the University of Minnesota. The authors declare no conflict of interest.
Funding Information:
We would like to acknowledge the funding support by the Buckman Graduate Fellowship from the Department of Bioproducts and Biosystems Engineering and the Doctoral Dissertation Fellowship at the University of Minnesota .
Publisher Copyright:
© 2019 Elsevier Ltd
Keywords
- Flat panel photobioreactor
- Geospatial variabilities
- Microalgae cultivation
- Open raceway pond
- Techno-economic analysis
