System Modeling and Control Design for Fast Voltage Regulation Using STATCOMs

Amit K. Jain; Aman Behal; Ned Mohan

doi:10.1109/IECON.2003.1280037

System Modeling and Control Design for Fast Voltage Regulation Using STATCOMs

Amit K. Jain, Aman Behal, Ned Mohan

Electrical and Computer Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Scopus citations

Abstract

Fast voltage regulation using static compensators requires a dynamic system model that is valid on an instantaneous basis. This paper presents a general modeling strategy that allows design of fast voltage regulation controller while accounting for system parameters. The co-ordinate transform used to model the system facilitates extraction of linearized system dynamics with the help of circuit simulators. It is shown that the problem of voltage regulation using instantaneous reactive current is non-minimum phase for certain operating conditions, thereby limiting achievable dynamic response irrespective of the control design method. Simulation results with a controller designed using input output bode plots are presented to illustrate efficacy of the proposed method.

Original language	English (US)
Title of host publication	IECON Proceedings (Industrial Electronics Conference)
Pages	538-543
Number of pages	6
Volume	1
DOIs	https://doi.org/10.1109/IECON.2003.1280037
State	Published - Dec 1 2003
Event	The 29th Annual Conference of the IEEE Industrial Electronics Society - Roanoke, VA, United States Duration: Nov 2 2003 → Nov 6 2003

Other

Other	The 29th Annual Conference of the IEEE Industrial Electronics Society
Country/Territory	United States
City	Roanoke, VA
Period	11/2/03 → 11/6/03

Keywords

Flicker mitigation
Modeling
STATCOM
STATCOM control
Voltage regulation

Access

10.1109/IECON.2003.1280037

OpenUrl availability

Full text

Cite this

@inproceedings{0ae9bd11e4224b09a43c1cf6752c1a12,

title = "System Modeling and Control Design for Fast Voltage Regulation Using STATCOMs",

abstract = "Fast voltage regulation using static compensators requires a dynamic system model that is valid on an instantaneous basis. This paper presents a general modeling strategy that allows design of fast voltage regulation controller while accounting for system parameters. The co-ordinate transform used to model the system facilitates extraction of linearized system dynamics with the help of circuit simulators. It is shown that the problem of voltage regulation using instantaneous reactive current is non-minimum phase for certain operating conditions, thereby limiting achievable dynamic response irrespective of the control design method. Simulation results with a controller designed using input output bode plots are presented to illustrate efficacy of the proposed method.",

keywords = "Flicker mitigation, Modeling, STATCOM, STATCOM control, Voltage regulation",

author = "Jain, {Amit K.} and Aman Behal and Ned Mohan",

year = "2003",

month = dec,

day = "1",

doi = "10.1109/IECON.2003.1280037",

language = "English (US)",

volume = "1",

pages = "538--543",

booktitle = "IECON Proceedings (Industrial Electronics Conference)",

note = "The 29th Annual Conference of the IEEE Industrial Electronics Society ; Conference date: 02-11-2003 Through 06-11-2003",

}

TY - GEN

T1 - System Modeling and Control Design for Fast Voltage Regulation Using STATCOMs

AU - Jain, Amit K.

AU - Behal, Aman

AU - Mohan, Ned

PY - 2003/12/1

Y1 - 2003/12/1

N2 - Fast voltage regulation using static compensators requires a dynamic system model that is valid on an instantaneous basis. This paper presents a general modeling strategy that allows design of fast voltage regulation controller while accounting for system parameters. The co-ordinate transform used to model the system facilitates extraction of linearized system dynamics with the help of circuit simulators. It is shown that the problem of voltage regulation using instantaneous reactive current is non-minimum phase for certain operating conditions, thereby limiting achievable dynamic response irrespective of the control design method. Simulation results with a controller designed using input output bode plots are presented to illustrate efficacy of the proposed method.

AB - Fast voltage regulation using static compensators requires a dynamic system model that is valid on an instantaneous basis. This paper presents a general modeling strategy that allows design of fast voltage regulation controller while accounting for system parameters. The co-ordinate transform used to model the system facilitates extraction of linearized system dynamics with the help of circuit simulators. It is shown that the problem of voltage regulation using instantaneous reactive current is non-minimum phase for certain operating conditions, thereby limiting achievable dynamic response irrespective of the control design method. Simulation results with a controller designed using input output bode plots are presented to illustrate efficacy of the proposed method.

KW - Flicker mitigation

KW - Modeling

KW - STATCOM

KW - STATCOM control

KW - Voltage regulation

UR - http://www.scopus.com/inward/record.url?scp=1442353737&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=1442353737&partnerID=8YFLogxK

U2 - 10.1109/IECON.2003.1280037

DO - 10.1109/IECON.2003.1280037

M3 - Conference contribution

AN - SCOPUS:1442353737

VL - 1

SP - 538

EP - 543

BT - IECON Proceedings (Industrial Electronics Conference)

T2 - The 29th Annual Conference of the IEEE Industrial Electronics Society

Y2 - 2 November 2003 through 6 November 2003

ER -

System Modeling and Control Design for Fast Voltage Regulation Using STATCOMs

Abstract

Other

Keywords

Access

OpenUrl availability

Other files and links

Fingerprint

Cite this