TY - JOUR
T1 - Turbulence model development for flotation cells based on piezoelectric sensor measurements
AU - Meng, Jun
AU - Xie, Weiguo
AU - Tabosa, Erico
AU - Runge, Kym
AU - Bradshaw, Dee
N1 - Publisher Copyright:
© 2016 Elsevier B.V.
PY - 2016/11/10
Y1 - 2016/11/10
N2 - Turbulence is an important factor that affects flotation performance, which needs to be incorporated into flotation models. However, the measurement of turbulence in industrial flotation cells is difficult because of the highly abrasive and aggressive slurry environment. This has made the development and validation of models incorporating turbulence difficult. The development of a measurement methodology based on the piezoelectric vibration sensor (PVS) has enabled the measurement of kinetic energy fluctuation in flotation cells. In the study presented in this paper, the PVS was first applied to a sugary water-air two phase mixture in a 3 m3 pilot flotation cell, and then to a Metso RCS 3 m3 flotation test rig with magnetite/silica slurry and air, to collect turbulence data. An orthogonal experimental design was used for both sets of tests, with different impeller speeds, air flow rates and cell level (aspect ratio) as input hydrodynamic parameters. From the measurement data collected in the two cells, the volume of the turbulence zone could be modelled; from this, the turbulence distribution in the flotation cells could be predicted. The models were validated by comparing the predicted with the experimental results.
AB - Turbulence is an important factor that affects flotation performance, which needs to be incorporated into flotation models. However, the measurement of turbulence in industrial flotation cells is difficult because of the highly abrasive and aggressive slurry environment. This has made the development and validation of models incorporating turbulence difficult. The development of a measurement methodology based on the piezoelectric vibration sensor (PVS) has enabled the measurement of kinetic energy fluctuation in flotation cells. In the study presented in this paper, the PVS was first applied to a sugary water-air two phase mixture in a 3 m3 pilot flotation cell, and then to a Metso RCS 3 m3 flotation test rig with magnetite/silica slurry and air, to collect turbulence data. An orthogonal experimental design was used for both sets of tests, with different impeller speeds, air flow rates and cell level (aspect ratio) as input hydrodynamic parameters. From the measurement data collected in the two cells, the volume of the turbulence zone could be modelled; from this, the turbulence distribution in the flotation cells could be predicted. The models were validated by comparing the predicted with the experimental results.
KW - Flotation
KW - Modelling
KW - Piezoelectric sensor
KW - Turbulence
UR - http://www.scopus.com/inward/record.url?scp=84992371885&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84992371885&partnerID=8YFLogxK
U2 - 10.1016/j.minpro.2016.05.013
DO - 10.1016/j.minpro.2016.05.013
M3 - Article
AN - SCOPUS:84992371885
SN - 0301-7516
VL - 156
SP - 116
EP - 126
JO - International Journal of Mineral Processing
JF - International Journal of Mineral Processing
ER -